Amprobe AT-7000 Série Manuel De L'utilisateur page 32

5. MAINTENANCE
Changing battery for transmitter:
The battery compartment on the back of the AT-7000-T is designed to make it easy for
the user to change the battery. A screw is added to secure the battery in case the unit is
dropped. 6 AA rechargeable batteries or 6 AA alkaline batteries may be used.
Battery Cover
1. Make sure that the Transmitter is turned off.
2. Use the star screw driver to unscrew the holding screws.
3. Remove the battery cover.
4. Install Batteries using the battery clip.
5. Replace the battery cover and secure it with the provided screw.
28
Screws
6 x AA batteries