Cb100D Dcb200 - Makita CB100D Manuel D'instruction

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Material
Temperature adjustment
steps
Size (L x W)
Net weight *
* Approximate weight without battery holder, battery cartridge, extension cord, and storage bag.
Specifications for battery holder and battery cartridge
USB power supply port
Rated voltage
Battery cartridge
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from country to country.
WARNING:
Only use the battery cartridges listed above. Use of any other battery cartridges may cause
injury and/or fire.
Combination of battery holder and blanket
For the combination of battery holder and blanket, refer to the table below.
• For the battery of 10.8 V - 12 V max, use battery holder "YL00000003" or "YL00000023".
• For the battery of 14.4 V or 18V, use battery holder "YL00000004" or "YL00000024".
Model
CB100D
DCB200
NOTE: The available battery holder varies depending on the country.
CB100D
Outer: 100% Polyester
Batting: 100% Polyester
Liner: 100% Polyester
700 mm x 1,400 mm (27-9/16" x 55-1/8")
10.8 V - 12V max
14.4 V
18 V
Battery
10.8 V - 12 V max
14.4 V or 18V
5 ENGLISH
3
0.58 kg (1.28 lb)
D.C. 5 V, 2.4 A, Type A
D.C. 10.8 V - 12 V max
D.C. 14.4 V
D.C. 18 V
BL1015 / BL1016 / BL1020B / BL1021B /
BL1040B / BL1041B
BL1415 / BL1415N / BL1430 / BL1430B /
BL1440 / BL1450 / BL1460B
BL1815 / BL1815N / BL1820 / BL1820B /
BL1830 / BL1830B / BL1840 / BL1840B /
BL1850 / BL1850B / BL1860B
Part number of battery holder
YL00000003 or YL00000023
YL00000004 or YL00000024
DCB200