Greencut GD750 Série Manuel D'utilisation page 55

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

CLOTHING AND PROTECTIVE EQUIPMENT
Dress appropriately. Do not wear loose clothing or jewellery that may get caught in moving parts. We recommend
the use of:
-
Eye protection (safety glasses).
-
Hearing protection.
-
Head and face protection (helmet and mask).
-
Hand protection (resistant and non-slip gloves).
-
Leg protection (trousers).
-
Foot protection (non-slip safety footwear).
VIBRATIONS
A high level of vibrations and long periods of exposure are the factors that contribute to the disease of the
white fingers and toes (Raynaud's Phenomenon). In order to reduce the risk of white fingers and toe disease, it is
necessary to take these recommendations into account:
-
Always wear gloves.
-
Make sure about having always warm hands.
-
Make sure that the chain is always well sharpened.
-
Take regular breaks.
-
Always hold the machine by the handles firmly.
If you detect some of the white finger and toe disease symptoms, seek medical advice immediately.
RESIDUAL RISK FACTORS
Risk of injury to the skin and other parts of the body by projected objects. This machine generates an
electromagnetic field during its operation. This field can, in some circumstances, interfere with active or passive
medical implants. To reduce the risk of serious or lethal injuries, people with medical implants should consult a
Doctor and the implant manufacturer before using this machine.
WORK AREA SAFETY
Do not use this machine in explosive atmospheres in the presence of flammable liquids, gases and dust.
Do not start the machine in a room or enclosed area. Exhaust fumes and fuel vapours contain carbon monoxide
and hazardous chemicals.
The area within a radius of 15 meters around the machine must be considered a risk zone in which no one should
enter while the machine is on (Safety Zone). Where necessary, use ropes and warning signs to mark the safety
zone. Keep children and bystanders away while operating this machine. Distractions can cause you to lose control.
FUEL SAFETY
Gasoline/Fuel/Petrol and oil are dangerous. Do not inhale or swallow them. If you ingest fuel and / or oil, see your
doctor immediately. If you come in contact with the fuel or with the oil, clean yourself with plenty of soap and
water as soon as possible. If you feel irritated eyes or skin, consult a doctor immediately.
Fuel and oil are dangerous and highly flammable chemicals. If they ignite, extinguish the fire with a dry powder
extinguisher.
Do not spill fuel or smoke near the machine.
Always turn off the engine before refuelling.
Always refuel in well-ventilated areas and never with the engine running, or when is hot.
If you find a fuel leak, do not start or run the engine until the leak has been repaired.
Make sure that the fuel cap is properly closed.
Fuel stored in the carburettor for long periods of time can cause hard starting and could also lead to further
repairs and maintenance.
Always store the fuel in approved containers
55
EN

Publicité

Table des Matières
loading

Table des Matières