Height Adjustment - Pressalit CT 4000 Manuel D'utilisation Et D'entretien

Height adjustment

When the change table is installed at the recommended height, it can be
adjusted between 300 and 1000 mm (11 .81 and 39 .37 inches) above the floor .
The height adjustment is done by pressing the buttons on the frame or on the
wired remote control unit .
en
Press and hold the Up button to raise the table, and press and hold the Down
button to lower the table . The movement stops when the button is released .
The height adjustment may only be used at temperatures between 15 and 30
degrees Celsius .
16
Make sure that there are no objects under
the change table when adjusting the
height.
To avoid the risk of strangulation, make
sure that the wired remote control is
placed in its holder when not in use.