Problems And Solutions - XciteRC High-Speed Racebuggy 2WD Mode D'emploi

Problems and solutions

Problems and solutions
It can not move (immovable).
The car does
not move
straight.
The moving is
not smooth.
The speed is
slow.
It can not jump.
Move automati-
The vehicle
cally.
mouves or
stops automati-
cally.
Stop automati-
cally.
30801000/2000/3000 - High-Speed Racebuggy 2WD
Transmitter hasn´t power or for-
got to install batteries.
The vehicle is not charged.
The body and transmitter are not
paired successfully.
The electric wave can not be
transmitted..
The power switch is not turned
on.
The wheels attach mote or dust.
The driving direction is not ad-
justed..
Pull the accelerator of transmitter
to the end.
Adjust the speed with the high/
low speed button of transmitter.
The grade of slope is not good
enough or the air defense is not
good enough.
It is not paired.
The forward/backwatd operation
are not adjusted.
It is interfered by other electric
waves.
The vehicle has no power.
Put alkaline batteries into the bat-
tery compartment according to
the description in this manual.
Besides, the old batteries may be
lack of power.
Charge it according to this
manual.
Pair them according to this
manual.
Shorten the distance between
vehicle and transmitter.
Turn on the power switches both
vehicle and transmitter.
Clean the wheels. Otherwise,
they will rotate ceaselessly.
Adjust the driving direction ac-
cording to this manual.
Speed up slowly according to
this manual.
Change the speed to high speed
according to this manual.
Adjust he platform´s high and
practice operating according to
this manual.
Pair it according to this manual.
Adjust wheels to the static state
according to this manual.
Try to move to another place.
Charge it according to this
manual. Charge time is about 10
minutes.
EN
23