Adjustments Methods; The Operating Key To The 2Wd Vehicle - XciteRC High-Speed Racebuggy 2WD Mode D'emploi

RC functions
The holding way of transmitter
Hold the transmitter with your left hand (as picture) and put the
forefinger onto the accelerator joystick. Control the steering wheel
with your right hand.

Adjustments methods

Adjust the speed
If you feel the vehicle moves slowly, please lightly press the con-
version switch (high-speed/low-speed) transmitter. It changes to
High/
low-speed
conversion
switch
Direction regulator
When it
turns left

The operating key to the 2WD vehicle

The operation of accelerator depends
on the moving range.
If you pull it to the highest speed (100%),
it means to pull the accelerator to the
end, the wheels may rotate strongly but
the vehicle does not move.
When the wheel is in the state of "idle
running", loose the accelerator and then
speed up slowly.
The running state is possibly different
due to the different pavement condi-
tions.
30801000/2000/3000 - High-Speed Racebuggy 2WD
high-speed. When pressing
the switch again, it is set to
low speed.
Forward/backward adjustment
If you find that the vehicle moves
forward or backward automatically
without pressing the accelerator,
you can adjust this button to stop it.
Left/right adjustment
The button is to control the wheels'
turning. It is installed inside the body
When it
turns right
Pull down
Rotate
Pull it gradually
EN
Forward/
back-
ward
regulator
21