Qr Code; Maintenance; Tips - Bigben BTA01 Mode D'emploi

QR Code

This product is compatible with applications currently available on IOS and Android platforms.

Maintenance:

After 5-6 uses or 3-5 days of use, please clean the product as follows:
1. Turn off the power and disconnect the DC adaptor.
2. Fully pour out any water remaining in the tank. Do not pour out water from the air outlet side. (Fig.1)
3. Put a small amount of detergent diluted in the water. Then, using a clean cloth, dip into the water
and gently wipe up the unit. If there is any dirt on the inner side of tank, please clean it.
4. Never use a medical diluent or alcohol during maintenance. Doing so may cause product damage
and erase various signs on the product.
Note: Please use neutral detergents.

Tips

● Please use another container to add water. Do not run a water tap directly into the tank.
● Pure essential oils or water-soluble oils are available for use. Please clean the unit as per the
maintenance instructions before changing to a new type of essential oil.
● It is quite normal for different humidity environments and temperatures to affect the mist density.
● Do not allow the mist to directly spray into furniture, clothes or walls.
● The essential oils may cause dyeing. Please use a clean cloth to wipe up in the event of accidental
spillage.
● To ensure sanitary use, please completely pour out the water and wipe the unit with a soft cloth after
each use.
● If the unit will not be in use for an extended period, please completely pour out any water remaining
in the tank and store the unit in a dry place.
● When unit connects to the power supply, the unit's default state is OFF.
● Whenever there is a shortage of water in the tank, even if the unit is connected to the power supply,
it will shut down automatically, with all functions turned off.
AIR OUTLET
AIR OUTLET
- EN 7 -