Light Control - Bigben BTA01 Mode D'emploi

Operations
1
4
1. Connect the DC port to the DC slot of the base.
2. Take off the cover.
3. Add water to the tank, without exceeding the max 400 ml mark.
4. Add some essential oils into the water (2-3 drops per 100 ml).
5. Re-install the cover.
6. Connect the AC adaptor to the power socket.
1. MIST timer:
First, press MIST button; the apparatus enters high mist mode with "ON" continuous mist option.
Keep pressing to move to 1H/3H/6H/OFF.
A long press for 2 s will turn off the unit in any mode.
2. HIGH / LOW mist level:
PRESS "HIGH / LOW" button:
1 time "Dee" sound: High mist.
2 times "Dee" sound: Low mist.
3 times "Dee" sound: Intermittent mist (run for 30 s, pause for 30 s, repeat cycle).

3. LIGHT control:

First press the "LIGHT" button; the 7 LED colours will change automatically.
Second press: pause on current colour.
Third press: move to next colour and each colour may toggle between bright and dim mode. When
power is connected, LIGHT can work on its own.
2
5
- EN 5 -
3
6