Table des Matières
Publicité
k Selecting an Analysis Mode and Drawing a Graph
This section contains a detailed procedure that covers all steps from selecting an analysis
mode to drawing a graph.
Note
• Step 4 through step 7 are not essential and may be skipped, if you want. Skipping any step
automatically applies the initial default values for its settings.
• If you skip step 2, the default analysis mode is the one whose name is displayed in the top
line of the Graph Mode screen.
• To select an analysis mode and draw a graph
1. On the sampling screen, press 4(OTHER)1(GRAPH).
• This displays the Graph Mode screen.
2. Press 3(MODE), and then select the analysis mode you want from the menu that
appears.
To do this:
Graph three sets of sampled data
simultaneously
Graph sampled data along with its first
and second derivative graph
Display the graphs of different sampled
data in upper and lower windows for
comparison
Output sampled data from the speaker,
displaying graph of the raw data in
the upper window and the output
waveform in the lower window (EA-200
only)
Display the graph of sampled data
in the upper window and its first
derivative graph in the lower window
Display the graph of sampled data
in the upper window and its second
derivative graph in the lower window
• The name of the currently selected mode appears in the top line of the Graph Mode
screen.
ε
-34
Using the Graph Analysis Tools to Graph Data
Analysis mode name
Perform this menu
operation:
[Norm]
[diff]
[COMPARE] → [GRAPH]
[COMPARE] → [Sound]
[COMPARE] → [d/dt]
[COMPARE] → [d
2
2
/dt
]
To select this
mode:
Graph Analysis
2
2
d/dt & d
/dt
Compare Graph
Compare Sound
Compare d/dt
2
2
Compare d
/dt
Publicité
Table des Matières
