Control Panel C6.2; Operating Mode Selection - Komfovent C6.1 Manuel D'installation Et D'utilisation

Connectivity. Upon connecting the unit via a web browser, you must configure
the computer's network settings: IP address and subnet mask.

2.5. Control Panel C6.2

2.5.1. Operating mode selection

In the control panel C6.2, the user can choose only one of the usual operation modes:
Away. The recommended choice when you are not at home or when there are fewer people
inside the premises than usual. The ventilation intensity will be 20%.
Normal. Recommended when there is the usual number of people inside the premises. The
ventilation intensity will be 50%.
Intensive. The recommended choice when there are more people inside the premises than
usual. The ventilation intensity will be 70%.
Boost. The recommended choice when it is necessary to quickly ventilate the premises. The
ventilation will run at its maximum intensity.
The operation mode parameters are preset at the factory. For the modification of each of the mode pa-
rameters, if you have to change the temperatures or the air flows, you must have a connection to a computer
network or the Internet (see Sections 2.2, 2.3). Then the modifications can be performed with a smart phone
or computer.
For more about the choice of modes, read Section 2.4.3.
UAB AMALVA we reserve the right to make changes without prior notice
C6-17-01
2.5.2
2.5.4
2.5.5
Fig. 2.5. C6.2 panel view
Connectivity
IP address
192.168.0.60
Subnet mask
255.255.255.0
2.5.1
2.5.3
2.5.6
33