Technical Data - AEG BSS 4816 Mode D'emploi

Troubleshooting
Problem Possible Cause
No sound No power supply.
from the front
loudspeakers.
The volume is
turned off.
The loudspeaker
leads are wrongly
connected.
No signal at the
RCA input of the
cinch sockets.
The loudspeaker
connection is the
wrong way round or
not correct.
No sound The loudspeaker
from the connection is the
center or wrong way round or
surround not correct.
loudspeakers
The sound source
(5.1).
does not emit any
5.1 signal.
The subwoofer is
not set to 5.1.
Device cannot be operated.
be operated. Device crashes and
"hangs".
No audio Speaker is not
signal via the paired to the audio
Bluetooth source.
connection
Volume too low
Speaker Pairing does not
cannot be work
connected
Audio source is
switched off
Bluetooth is
switched off at the
audio source.
Bluetooth version is
not supported.

Technical Data

Model: ................................................................................BSS 4816
Remedy
Power supply: ................................................................ 230 V, 50 Hz
Check the mains con-
Power consumption
nection and the posi-
tion of the on/off switch
on the subwoofer.
Playable file formats: ..................................................... MP3/WMA
Check the volume set-
Net weight: .............................................................................15.9 kg
ting.
Check the loudspeaker Radio element
connections.
Bluetooth
Check your external
Bluetooth support: ........................................................V2.1 + EDR
sound source (e.g.
Range: ..................................................................approx. 15 metres
DVD player) and the
Transmission frequency: ......................................2.402-2.480 GHz
RCA connections.
Protocols: ....................................................................A2DP/AVRCP
Check the loudspeaker
The right to make technical and design modifications in
connection.
the course of continuous product development remains
reserved.
This device has been tested according to all relevant current
Check the loudspeaker
CE guidelines, such as electromagnetic compatibility and low
connection.
voltage directives, and has been constructed in accordance
with the latest safety regulations
Switch on the 5.1
output of the sound
source.
Set the subwoofer to
5.1.
Disconnect the power
Disposal
supply for 5 sec. Then
switch the device on
Meaning of the "Dustbin" Symbol
again.
Protect our environment: do not dispose of electrical equip-
Check whether a
ment in the domestic waste.
connection exists. If
Please return any electrical equipment that you will no longer
necessary, pair the
use to the collection points provided for their disposal.
speaker again to the
audio source. This helps avoid the potential effects of incorrect disposal on
the environment and human health.
Increase the volume on
the speaker
This will contribute to the recycling and other forms of reuti-
Increase the volume on
lization of electrical and electronic equipment.
the audio source.
Information concerning where the equipment can be dis-
Check whether the
posed of can be obtained from your local authority.
audio source supports
the A2DP protocol.
Switch on the audio
source
Switch on the Blue-
tooth function in the
audio source.
Use a different play-
back unit.
Standby: ..............................................................................<1 W
Operating mode: ...................................................max. 200 W
Frequency range: .................................... FM 87.5 ~ 108 MHz
English
45