Bluetooth Operation - AEG BSS 4816 Mode D'emploi

English
44
Explanation of the operating keys:
PLAY/PAUSE (16)
You can briefly pause and restart playback. Press the button
again to continue playback at the same point.
NEXT / PREV (9)
• Use the button to skip to the next or to the subsequent
title etc.
• Use the button to skip to the previous title.
STOP (7)
Stops the USB music playback.

Bluetooth Operation

Bluetooth involves a technology for wireless radio connec-
tion of devices over a short distance. Devices with Bluetooth
standard are transmitting between 2.402 and 2.480 GHz in
the ISM band (Industrial, Scientific and Medical). Interference
can be caused for example by WLAN-networks, DAB radios,
cordless phones, or microwave ovens which work on the
same frequency band.
This device offers you the possibility to use a Bluetooth-
enabled device. The functional radius is limited to approx.
15 metres depending on the surroundings and the unit used.
If your playing device supports the A2DP profile (Advanced
Audio Distribution Profile) and has a music-player function,
then you can also wirelessly transfer music to the device. The
A2DP profile involves a multi-vendor Bluetooth profile. By
streaming, stereo-audio signals are wirelessly transferred be-
tween the playing device (source) and the receiving device.
To be able to remotely control the source, the playback de-
vice must support the AVRCP profile (Audio Video Remote
Control Profile).
Due to the different device manufacturers, models, and
software versions, a full functionality cannot be guaranteed.
Logging on devices (Pairing)
Before you listen to music via the unit, you must pair the
devices.
1. Ensure, that the Bluetooth function is activated in your
player (e.g. mobile phone). For this, refer to the operation
manual of your player.
2. Press the INPUT button (3) repeatedly, until "bt" is shown
on the display. Two short beeps can be heard. These
signal that the device is in pairing mode.
3. Chose the Bluetooth menu in your player and register
the device in your player. For this, refer to the operation
manual of your player. The device "AEG BSS 4816" will
show in your player as a selection.
NOTE:
Only one playback unit can be connected to the
speaker. If the speaker is already connected to another
playback unit, the speaker will not appear in the BT
selection menu.
4. Now enter the password "0000" in your player, depend-
ing on the device manufacturers, model, and software
version.
If the registration was done successfully, a beep will sound.
For the further procedure, please refer to the user manual
of the playback unit. If possible, adjust the volume of the
external unit to a comfortable level.
For operation, please refer to the section "Explanation of the
operating keys" in the "Storage media mode" section.
NOTE:
• Depending on the device manufacturer, you need to
perform the registration (PAIRING) again to connect the
devices.
• In case of problems with the registration of a replay
device, deactivate the WiFi-/ and mobile data function
in your playback device.
• The Bluetooth compatibility cannot be ensured for
devices (e.g. mobile phones) getting released in the
future.
• To ensure an optimal connection, make sure that the
battery of your player is completely charged.
• Some of the mobile phone brands have an energy-sav-
ing mode. Deactivate the energy-saving mode as it can
otherwise result in problems during the data transfer
through Bluetooth.
• To be able to transfer audio data, Bluetooth needs to
stay activated in your player. Observe the operation
manual of your player.
• If a mobile phone on which you are playing music
receives a call, the music will be interrupted. The sound
however is not played back via the speaker. After you
have ended the call, the devices are connected to each
other again and playback continues.