Driver Installation - i-tec U3DUAL4KHDMI Mode D'emploi

i-tec USB 3.0 A/C Dual HDMI Adapter

DRIVER INSTALLATION

Do not connect the adapter to your laptop, PC, tablet or smartphone before
installing the drivers. Drivers need to be installed prior to first use. Make sure that
you have updated BIOS and newest drivers for your device before the installation.
You can download drivers for the adapter from our website www.i-tec-europe.eu
on the page for this product in the „Download" tab. Then you just need to confirm
automatic installation.
You can connect the adapter directly, when using Windows 10. The drivers will be
installed automatically from the system, when connected to the internet.
For Android, Chrome OS and Ubuntu use the drivers from the DisplayLink chipset
manufacturer. You can download them here: http://www.displaylink.com/downloads
or on our website www.i-tec-europe.eu on page for this product in the „Download"
tab.
CONNECTING HDMI MONITOR
The adapter is equipped with 2x 4K@60Hz HDMI Port for connecting one or two
monitors or projectors with HDMI interface. You can use modern plasma or LCD
monitors and TVs as imaging device. It is recommended to use high quality HDMI
cables with the adapter. The screen of your laptop, tablet, PC or smartphone might
flicker during additional monitor installation, but this is normal.
EN
05