Weka 530 Série Instructions De Montage, D'utilisation Et D'entretien page 9

Assembly conditions for a weka assembly team
If you wish for help assembling your cabin and choose to employ a weka assembly team, weka Holzbau
GmbH will carry out the following services for you:
Assembly means putting together (installation) of the individual parts supplied.
It does not include treating them with a wood protection agent, the delivery and assembly of accessories and
accessory parts.
Electrical connections are not included in the assembly service.
The items to be assembled must be located at the installation site/location/base area. Transport of the article
or the individual parts over a distance greater than 15 m or to another level is not included in the assembly
price quoted. The substrate must be stable, horizontal and level.
In the event of doubt, reference should be made to DIN 18202 'Level tolerances in building construction',
tab. 3, row 3, with a maximum height difference at the furthest points of approx. 10 to 11 mm.
All preparatory work must have been carried out in accordance with the technical regulations before
assembly begins. The substrates/floors/foundations constructed or selected by you must be suitable for the
assembly.
Tools
You should have the following tools to hand before beginning assembly.
Spirit level
Mitre saw/
hand disk saw
Abbreviations / Symbols
cm -
mm -
ca. -
Abb. -
Ansicht von -
außen
Angaben in mm -
Technische Änderungen vorbehalten!
Spring tape
measure Drill
Universal cutter
Centimetre
Millimetre
approximately/approx.
Figure
View from the
outside
data in mm
Elektric
screwdriver
Spanner
9
Hammer Rubber mallet
Allen key Screwdriver
- Not included in delivery!
- Design variant
- Supply air
- Outgoing air
© Copyright HRB 3662