Usb Device/Audio File/External Disc Control Features; Playing Usb Device - Kenwood KOS-A200 Mode D'emploi

USB device/Audio file/External disc control features

Playing USB device

Playing USB device
1
Select a source other than the USB device
Press the [SRC] button.
2
Connect the USB device.
3
Select USB source
Press the [SRC] button.
Select the "USB" display.
• Refer to <About AAC, MP3 and WMA> (page 6) for the
Audio file you can play.
• For the types of available USB devices and how to
connect USB devices, refer to <About USB device>
(page 5).
• After you stopped playing a file contained in the USB
device, you can restart playing the file from the point
where you stopped its playback.
Even after removing the USB device, you can restart
playing the file from the point where you stopped
its playback as long as the files contained in the USB
device are all the same.
• Be sure to insert the USB device connector as far as it
will go.
10
|
English
38
SCAN
A.RDM
[0] — [9]
F.REP
SRC
F.SEL
SCRL
4/¢
RDM
[3]
REP
Pause and play
Press the [38] button.
Each time you press the button, the audio pauses
or plays.
Removing the USB device
1
Select a source other than the USB device
Press the [SRC] button.
2
Remove the USB device.
• Removing the USB device with it selected as a source
can damage the data stored in the USB device.
• You can remove the USB device safely with the unit
power turned off.