DeWalt DW890 Guide D'utilisation page 2

DW890/384122 11/22/04 7:32 AM
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS
OR ANY D WALT TOOL, CALL US TOLL FREE AT:
E
1-800-4-D WALT (1-800-433-9258)
E
SWIVEL
HEAD
BLADE
DEWALT... BUILT JOBSITE TOUGH
DeWalt high performance industrial tools are made for America's
toughest industrial and construction applications. The design of every
tool in the line—from drills to sanders to grinders—is the result of
rigorous use on jobsites and throughout industry. Each tool is
produced with painstaking precision using advanced manufacturing
systems and intense quality control. Every tool is checked before it
leaves the factory to make sure that it meets your standards for
durability, reliability and power.
D WALT Built Jobsite Tough...WE GUARANTEE IT.
E
Page 4
TRIGGER
SWITCH
DW891-200
Important Safety Instructions
WARNING: When using electric tools, basic safety precautions
should always be followed to reduce risk of fire, electric shock, and
personal injury, including the following:
READ ALL INSTRUCTIONS
Double Insulation
Double insulated tools are constructed throughout with two separate
layers of electrical insulation or one double thickness of insulation
between you and the tool's electrical system. Tools built with this
insulation system are not intended to be grounded. As a result, your
tool is equipped with a two prong plug which permits you to use
extension cords without concern for maintaining a ground
connection.
NOTE: Double insulation does not take the place of normal safety
precautions when operating this tool. The insulation system is for
added protection against injury resulting from a possible electrical
insulation failure within the tool.
CAUTION: WHEN SERVICING USE ONLY IDENTICAL RE-
PLACEMENT PARTS. Repair or replace damaged cords.
Polarized Plugs(DW890, DW891)
Polarized plugs (one blade is wider than the other) are used on
equipment to reduce the risk of electric shock. When provided, this
plug will fit into a polarized outlet only one way. If the plug does not
fit fully into the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician to install the proper outlet. Do not change the
plug in any way.
Safety Instructions For All Tools
• KEEP WORK AREA CLEAN. Cluttered areas and benches invite
injuries.
• CONSIDER WORK AREA ENVIRONMENT. Don't expose power