Operation - General; Before First Use - Bestron ACV2000 Mode D'emploi

• Never use the appliance outdoors or in a bathroom.
• Never use the appliance to dry items by placing them on top of it.
• Always remove the plug from the wall socket after use, and before
cleaning the appliance.
• Switch off the appliance in the event of a malfunction, before removing the
plug from the wall socket, and when you have finished using the convector
heater.
• Place the appliance on a heat-resistant surface. Make sure that the
appliance connot fall over
• This appliance may not be used through an external timer or by means of
a remote control.
oPerAtion
- general
The appliance is intended only for domestic use,
not for professional use.
1. a. Button 1250Watt
with indicator light
b Button 750Watt
with indicator light
c. Turbo button
2. Thermostat dial
3. Handle
4. (Hot) air outlet
5. Body
6. Warm air fan outlet
7. Foot support
8. Plug

before first use

Remove the ceramic heater from the packaging and remove all the packaging materials.
The convector heater may emit a slight smell on use for the first time. This is due to the appliance
being heated for the first time. The smell will disappear after 1 to 2 minutes.
use -
Assembly of the foot support
The two support feet must be fitted by using the screws, before you use the
convector heater. Please see figure 2.
6
3
1
2
5
8
7
16
instruction manual
4
Figure 1
Figure 2