Sauber V20 Animal Plus Mode D'emploi page 11

Electricity and heat
1. Before use, check that the mains power supply voltage is
the same and the voltage is the same as the voltage
indicated on the appliance.
2. Regularly check the power cord for damage.
3. Do not operate any appliance with a damaged cord or
plug or after the appliance malfunctions, or is dropped or
damaged
manufacturer or the nearest authorized service agent for
examination,
adjustment.
4. To remove the plug from the plug socket, pull the plug. Do
not pull the power cord.
5. Make sure the power cord does not come into contact
with hot surfaces or steam.
6. The machine should not be operated by means of an
external timer-switch or by means of a separate system
with remote control.
7. If an extension cord is absolutely necessary, a 10-ampere
cord should be used. Cords rated for less amperage may
overheat. Care should be taken to arrange the cord so
that it cannot be pulled or tripped over.
8. To avoid a circuit overload, do not operate another high
voltage appliance on the same circuit.
9. To protect against electric shock do not immerse cord,
plugs, or housing in water or other liquid.
10. Do not touch the appliance if it falls into water. Remove
the plug from its socket, turn off the appliance and do not
use it again.
11. Do not use the appliance close to hot objects such as a
stove or oven.
Using the appliance
1. The use of accessory attachment not recommended by
the appliance manufacturer may cause injuries.
- 10 -
in any manner.
repair
Return
or electrical
appliance
or mechanical
V20 Animal Plus
to