Q-Connect PROFESSIONAL COMB BINDER 25 Mode D'emploi page 3

1 Margin Depth Control
2 Edge guide
3 Punching Channel
4 Punching Handle
5 Binding Mechanism
6 Binding Handle
7 Comb Selector
8 Waste tray
EDgE ALIgNMENt
The adjustable Edge Guide allows pages of various sizes to be
accurately aligned for the best punching results. Move the edge
guide left or right and stop it at the required position. Test punch-
ing the scrap sheet and re-adjust if necessary.
PuNChINg
With the Punching Handle on the right, align sheets or covers and
insert the edge to be bound into the Punching Channel and en-
sure they are aligned to the Edge Guide. Pull the Punching Handle
all the way down.
The PROFESSIONAL COMB BINDER 25 can punch max. 25 sheets
of 80 gsm paper at once. Punch max. 1 plastic cover at a time. To
minimize the fatigue of the PROFESSIONAL COMB BINDER 25, we
recommend to punch max. 25 sheets every time.
Move the punching Handle upwards again and remove the
punched document.
MARgIN DEPth CONtROL
The PROFESSIONAL COMB BINDER 25 comb binder is equipped
with a Margin Control knob for improved document reading and
paper strength. It can be turned either clockwise or counter-
clockwise to suit the size of the document being bound. Generally
a small margin depth is required for small comb sizes and a larger
margin depth is
recommended for larger comb sizes.
RECOMMENDED SEttINg
Depth 2.5: 6mm - 8mm.
Depth 3.5: 10mm - 12mm.
Depth 4.5: 14mm - 18mm.
Depth 5.5: 20mm and more.
BINDINg
Place a plastic comb with the side to be opened upwards onto the
Binding Mechanism. Push backwards the Punching Handle so far
that the comb is opened enough.
Position the punched sheets vertically in the open comb. Locate
the punched holes over the open comb fingers and rotate the
sheets forward onto the comb. When all the sheets are loaded
onto the plastic comb, release the Binding Handle to its original
position to close the plastic comb completely. You can now
remove the bound booklet and enjoy your finished work.
3
EMPtyINg thE wAStE tRAy
Take out the waste tray from the front side of the machine. For best
results, empty the tray regularly.
StORAgE
Close all lids and move handles to rest position.
gENERAL SAFEguARDS
Place the comb binder on a secure and stable work table to
prevent it from falling and causing personal injury and damage to
the machine.
Use the machine only for its intended purpose. Always test the
machine with some scrap paper before punching the final docu-
ment.
When punching plastic covers, we recommend to punch the cover
with a sheet of paper on both sides.
Empty the waste tray regularly.
Lift the machine from the bottom, not from the lids or handles.
Unauthorised maintenance is not allowed.
tEChNIC AL DAtA
Punching capacity: 25 sheets (80gsm).
Number of punches: 24.
Binding capacity: 450 sheets.
max. Document size: 360mm.
Max. Binding Comb: 51mm.
Variable punching margin: 2.5mm - 5.5mm.
t
W W W . Q - C O N N E C T . C O M