Climadiff CVP Série Notice D'utilisation page 35

Masquer les pouces Voir aussi pour CVP Série:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Lock (depending on model)
For cellars fitted with a lock, the keys can be found in the bag along with the manual.
To open the cellar, turn the key anti clockwise.
Subdued reading light (depending on model)
When the door is opened, the switch located under the top panel provides you a low
emissive LED light to make it easier to read labels in a dark room.
Don't forget to switch it off after closing your wine cabinet by pressing the switch
symbolized by the "lamp" icon.
Reversing the door (depending on model)
Our wine cabinets are delivered with the door opening from left to right. To reverse
the opening direction:
-
Remove the top hinge cover
Unscrew the mounting plate
-
Remove the door
-
Reverse the handle
-
Unscrew the lower pivot and reattach in the opposite corner
-
Replace the door
-
Reattach the upper mounting plate on the opposite corner
-
Replace the hinge cover
-
Place the cover caps over the holes.
-
IMPORTANT: ADJUSTING THE FEET OR DOOR OR REVERSING THE DOOR IS
NOT COVERED BY THE WARRANTY AND WILL BE CHARGED FOR BY YOUR
RETAILER.
Shelves
Each cellar has its own type of bottle shelf.
Note that there is no ideal storage arrangement. A collection of bottles of wine is rich
when it is varied. It is up to you to arrange the storage capacity of your wine cellar
according to your collection.
Additional shelves may be ordered as a chargeable option from your retailer or after-
sales service, or from our web site www.climadiff.com
Tip: To prevent damage to the door seal, ensure that the door is fully open before
pulling out the shelves to add or remove bottles.
35

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cv sérieCla série

Table des Matières