Free Room; Installation - BROMIC RDV Série Notice De Mode D'emploi Et D'entretien

6.4

Free room

When installing the unit leave enough free room to allow opening, correct use and easy maintenance in safe
conditions.
6.5

Installation

Place the condensing unit on the floor.
Install the evaporator as follows:
A) open fan cover E by unscrewing the 4 screws F; drill the holes on the wall of the coldroom keeping the
necessary distance from the wall.
24
A B C D
RDV1 330 420 21 47
RDV1 550 420 21 47
Ø1 Ø2
30 9
30 9