Publicité
Quick Installation Guide
Introduction
Thank you for purchasing the LINDY AV Conversion Switch. Featuring 8 AV inputs which can
be converted and scaled to resolutions up to Full HD 1080p to be output via 3 outputs, this
Switch is an ideal addition to any meeting or conference room, lecture hall or auditorium. The
Switch features configuration and control via RS-232, Telnet, Web GUI and IR making it simple
to integrate within automated installations. For added flexibility the Switch can be used with
LINDY's range of AV Extenders, to reach remote displays and projectors.
Package Contents
AV Conversion Switch
IR Remote Control with 2 x AAA Alkaline batteries
IR Extender Cable
VGA to 3 x RCA (RGB) Adapter cable
Mounting Brackets
Multi Country Power Supply with UK, EU, US & AUS adapters +5V DC 3A
LINDY Quick Install Guide
Features
Converts and Scales 8 AV Inputs to resolutions up to Full HD 1080p
3 x HDMI + Optional Analogue Audio
3 x VGA + Analogue Audio
Component Video + Analogue Audio
Composite Video + Analogue Audio
Supports simultaneous video output via VGA and 2 x HDMI
Supports simultaneous audio output via Analogue 3.5mm and Digital Coax
Controlled by IR, OSD, RS-232, Telnet and Web GUI
Installation
To begin using the Switch simply connect your AV source devices to the corresponding input
ports of the Switch using standard male/male cable, and then connect the outputs of the Switch
to your display equipment again using standard male/male cables as required. The VGA output
of the Switch can also be used with Component video display using the supplied VGA/RGB
adapter cable. Once all sources and displays have been connected attach the power supply
and turn the Switch on using the Power switch on the rear of the unit and then the power button
on the front of the unit.
You can now switch between the inputs using the input selections buttons on the front of the
unit or by using the corresponding buttons on the supplied IR remote control. To enter the On
Screen Display (OSD) press the Menu button and use the + and – buttons to navitgate the
menus, using the Enter button to make your selections.
For a full overview of this product including supported input/ouput resolutions and the OSD
along with instructions for using the Web GUI and RS-232/Telnet commands please review the
full LINDY manual available from www.lindy.com.
English
Publicité
