Operating And Safety Instructions; Specific Safety Information; Delivery Scope - Brita 298900 Mode D'emploi

3 Operating and Safety Instructions

3.1 Qualifi ed Personnel
Installation and maintenance of this appliance may only be carried out by trained and
authorised personnel.
3.2 Correct Use
The correct and safe operation of the product is subject to the installation, use and main-
tenance described in this Manual.
3.3 Liability Exclusion
Installation must be performed precisely in accordance with the instructions in this man-
ual. BRITA shall not be held liable for any damage, including subsequent damage, arising
from the incorrect installation or use of the product.
3.4 Specifi c Safety Information
The sensor housing and the electronics cover must never be opened.
1 17
Follow the operating instructions of the connected BRITA fi lter system.
Protect the appliance from sunlight and mechanical damage. Do not fi t the appliance near
sources of heat or an open fi re.
The components under pressure are designed for a service life of 10 years. After expiry,
the parts must be replaced.
Following long stagnation periods (2–3 days), we recommend pre-rinsing the
BRITA FlowMeter before use.
3.5 Safety Assembly Instructions
The sensor must be installed horizontally. All parts must be installed in accordance with
the country-specifi c regulations on the installation of drinking water facilities.
4 Installation
Before installation and use, read the technical data (Chapter 11) and the operating and
safety instructions.
Note: If a fi lter system is already installed, the fi lter cartridge must be replaced before
installing the BRITA FlowMeter. Only when installing a new fi lter cartridge can the correct
residual capacity be entered in the BRITA FlowMeter.

4.1 Delivery Scope

Prior to installation, remove the entire delivery scope from the packaging and check that
the following articles are present:
1 x Sensor
1
2 x Seal 3/8" ,
3 6
1 x Display unit with hose (pre-installed) ,
10 11
1 x Manual
If parts of the delivery scope are missing, please contact your local BRITA Service
Address (see back).
9