Maxspect Jump SK Série Mode D'emploi page 9

Maintenance of the Appliance
The Maxspect™ Jump Series Protein Skimmer can be completely torn down for maintenance,
cleaning and servicing. This is done in the order of the steps described below. Due to the harsh
conditions of a saltwater aquarium and resulting buildup of algae and other organic matter, it
is advisable to clean the pump to ensure the longevity of appliance. Maxspect recommends
doing a cleaning every 6 months or as necessary. If there is calcium buildup, it may be
necessary to soak these parts in a mild acid solution such as vinegar. DO NOT use strong acids,
because these may damage the components. After cleaning, reassemble the appliance.
1. DO NOT disassemble the static needle wheel.
2. The housing integrated with static needle wheel must be
installed on the correct side when reassemble the pump.
Maintenance
A B
EN
7