Perel CAMSET29 Mode D'emploi page 4

4. Overview
Refer to the illustrations on page 2 of this manual.
1 LCD display
2 Answer key
3 Left key
4 Right key
5 Menu/OK key
6 Time
7 Date
5. Installation
 Remove the existing peephole
Step 1
viewer.
 Make sure the hole matches the
camera (range between 13mm
and 28mm).
 If necessary, drill a new hole.
 Screws are included in the
Step 2
package.
o Use the short screws if the
o Use the long screws if the door
 Insert the appropriate screws into
the camera part.
 Do not tighten the screws yet.
V. 02 – 27/11/2017
CAMSET29
8
9
10
11
12
13
14
door is less than 65 mm thick.
is between 65 and 95 mm.
User Guide - System Information
Menu/OK key indicator
Right key indicator
Left key indicator
Battery status
System Settings
Visitor Records
4 ©Velleman nv