SpringCard TwistyWriter-IP PC/SC Guide De Démarrage Rapide page 6

6/12
9. Launch the application 'SpringCard NetPCSC Configuration'. You see your coupler with its new address in the
list of available readers. Click on Start to launch NetPCSC service.
10. The list contains the readers already installed. The list at the end of the page contains is the list of the read-
ers detected by the network. (One click on Install allows you to install the device as a local PC/SC coupler, a click
on Uninstall allows you to uninstall the coupler).
Your reader is operational when you see "Ready" in the PC/SC column of your coupler.
LED signification
When the reader is powered the LED4 lights up.
If LED 3 and 1 blink quickly the PC/SC service of the reader is not ready.
If LED 2 blinks slowly your reader is ready to use.
LED 1 lights up when you show a card to the antenna.
For more information, please refer to this page
http://tech.springcard.com/2016/springcard-netpcsc-for-windows/
Installation on other operating systems
Using your TwistyWriter-IP PC/SC Coupler under Apple MacOS X, Linux or other systems compliant with UNIX is
possible thanks to the open-source PCSC-Lite project (middleware and CCID driver).
A detailed procedure is provided at tech.springcard.com/guides/pcsc-unix-with-pcsclite/
NB: Should you have any question or experience any problem regarding the PCSC-Lite middleware or CCID
driver, please consider the blog and FAQ of the project's developers as your primary source for information.
PMU18293-AA