How To Clean - Steba HK20 Mode D'emploi

Usuage:
Plug the appliance into a grounded socket. All indicators are illuminated.
The child lock is activated automatically.
The child lock will be deactivated by pressing it for more than 3 sec.
Press the ON/OFF button
2000W. The large cooking area
The power can be changed by pressing
If the small cooking area should be used, then press
Large cooking area
Boil with 2000
Cook with 1600-1800
Keeping warm with 1200-1400 (ca 80-95°C)
Small cooking area
Boil with 1000
Cook with 800
Keeping warm with 300-500 (70-85°C)
The plate gets very hot. The residual heat light
cooling fan is working. Do not remove the plug from the socket until the
cooling fan stops by itself.
To adjust the Timer the button
a short time the time is changed in steps of one minute. If the button is touched for a
longer time then the timer changes in steps of 10min up to a max of two hours.
If the time is not changed within 5 seconds the timer function will be deleted and it
must be restarted.
With the button
ted then the button must be touched for three seconds.

How to Clean

∙ Disconnect plug.
∙ If the pots/pans are used without being cleaned, discoloration or cooked on stains
may be caused.
∙ Do not use petrol, thinner, scrubbing brush or polishing power to clean the induc-
tion cooker.
∙ Wipe using dish washing agent and damp cloth.
∙ Use vacuum cleaner to suck up dirt from the air intake and exhaust vent.
∙ Never run water over the unit. (water gets inside may cause malfunction).
, the cooling fan starts and in the display can be seen
will be heated.
should be touched. By touching the
the child lock can be activated. Should the child lock be deactiva-
.
.
is illuminated and the
button for
9