dirna Bergstrom Bycool Green Série Instructions De Montage page 21

LITE
In vehicles without original connection in hatch,
14
run the power cables to the hatch and secure
the supplied terminals on them, positioning
the supplied 2-way box.
Caution: Match the cables as indicated R= (+)
and N= (-).
In vehicles with original connection in hatch,
14a
connect the 2-way box to cable N and the
unit's R cable to the original 2-way box.
14
!
Caution: The cable to be installed must be 6 mm section; the (+) cable must be protected with a 30A
fuse.
Important: Due to the equipment's complex electronic regulation system, the current connection must
be made directly to the battery point or authorised connection point, and not to any other point which
services other accessories of the vehicle, taking the precaution to not invert polarity when making the
connection.
Important: Check the user manual for starting up.
*
21
14
14
EN
®
*