Description Of Parts - TOOLWAY TOOLTECH 100079 Manuel De L'utilisateur

16. Turn the fan OFF and unplug it from the outlet when not in use, when moving fan from one location to another
and before cleaning.
17. To disconnect, grip the plug and pull it from the wall outlet. Never pull by the cord.
18. Switch off and unplug from wall outlet when not in use, before assembling or disassembling parts;
and before cleaning. To avoid a tripping hazard, safely coil the cable.
19. Do not place this appliance on any flooring that may be marked or damaged by vibration of appliances.
20. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard. Do not attempt to repair, disassemble or modify the appliance by yourself.
There are no user-serviceable parts inside.

DESCRIPTION OF PARTS

Remove all packing material and accessories. Make sure all the accessories are included, if any item is damaged
or missing, contact your dealer.
ASSEMBLY OF METAL BASE
Ensure the Fan is unplugged from the power supply and turned off before commencing assembly.
OPERATION
1.
Place your fan on a level and dry surface.
2.
Plug the fan in to a suitable mains socket. Select the desired speed setting by turning the Speed Control Knob.
There are 4 settings – 0 (off), 1 (low), 2 (medium) and 3 (high).
3.
To adjust the tilt angle of fan head by pushing the guard gently.
Caution:
The fan should always be switched off when making this adjustment.
4.
Turn the Speed Control Knob to "0" and unplug the fan after use.
Warning:
Never touch the blade with hand or any other objects when the fan is operating.
1.
Unscrew the Screws from the Metal Tube.
2.
Insert the Metal tubes into the Metal Base, re-insert and tighten the Screws.
3
1. Safety Screw 2. Front Grill
3. Rear Grill 4. Handle
5. Switch Box 6. Motor
7. Blade 8. Metal Tube
9. Metal Base