Safety Warning; Proper Use; Operator's Obligations; Basic Safety Instructions - ABNOX AXFP 1 Série Instructions De Service

EN

Safety Warning

Read this Operating Manual through carefully in
order to familiarise yourself with the safe and efficient
operation of this product. Keep this handbook for
reference purposes. This Operating Manual contains
important instructions and directives for the safe and
proper operation of the product. It should also help
operating and maintenance personnel to minimise
dangers, repair costs and down times and increase
the reliability and operational life of the product. For
that reason it is important to assure at all times
access to this document to everyone who is
assigned with the supervision of this product.

Proper Use

The product may only be used in the operational
conditions for which it is designed. Any use that goes
beyond this is deemed improper. The manufacturer
is not liable for any damages resulting from improper
use. Also included in proper use are:
• Observing and following all instructions and
warnings in this Operating Manual.
• Completion of inspection and maintenance work as
scheduled.

Operator's Obligations

The party responsible for the safety of the product
must make sure that:
• only qualified personnel are assigned to work with
the product,
• these persons have the Operating Manual ready
to hand during all of their work and are required to
follow it consistently,
• the rules and regulations for the prevention of
accidents that apply at the site of use are followed
and that the scheduled service and maintenance is
completed on time.

Basic Safety Instructions

For the safe handling and smooth operation of this
product, you must heed the following:
• The product may not be used for purposes for
which it was not designed.
• No modifications may be made to the product.
• Safe operational condition must be assured at all
times. On request, we will hold a training session
for the device in order to provide your personnel
with the knowledge they need.
18
• Disconnect every energy supply when you are
performing maintenance on the product.
• All lines, hoses and screw connections need to be
checked for tightness regularly and for externally
visible damage. Any damage must be immediately
repaired by technicians and if needed replaced with
original parts.
• Safety equipment may only be removed after the
product has been completely shut down and
secured accident re-start.
• Prior to every operational start-up of the product,
all safety equipment must be properly replaced and
functional.
• The operator must provide the required personal
protective gear.
• Safety equipment and safety gear must be
inspected regularly.

Safety- and Danger Symbols

WARNING:
DANGEROUS LOCATION
Warnings are information about
dangers that can lead to bodily
injuries and/or property damage.
INSTRUCTION
The instruction symbols give you
valuable information and tips on
operation.
RISK OF CRUSHING
Warning against risk of crushing
ENVIRONMENTAL HAZARD
Protect the environment by properly
disposing of the various materials or
assuring they are properly transpor-
ted to disposal.