Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
MAINTENANCE
Changing the Blade
Use Roberts #10-468 25"
Replacement Blade. Use the
provided Allen wrench to remove
the nine screws, then hold the blade
by each end and carefully move the
blade out of blade holder.
Note: The flat side of the blade
should face the table.
Warning: Do not put your fingers
against the sharp edge of the
blade at any time.
Carry
Hook the chain to the ring on
the handle and carry the cutter
as shown.
-5-
Publicité
Table des Matières
