WUNDER RS Guide Rapide page 24

ENGLISH
Radiated/ conducted
/emissions
IEC/EN61000-4-3
With 80 MHz and 800 MHz is applied the higher frequency range. These guidelines may not apply in all situations.
Electromagnetic propagation is affected by absorption and reflection from structures, objects and people.
a) The intensity of the field for fixed transmitters such as base stations for radiotelephone mobile and cordless
phones) and land radio mobile, amateur radio equipment, radio transmitters in the AM and FM and TV
transmitters cannot be made theoretically and with precision. To establish an electromagnetic environment due
to fixed RF transmitters, it should consider the electromagnetic survey of the site. If the field strength measured
at the place where you use the instrument exceeds the applicable level of compliance of the above, it should be
placed under observation normal operation of the tooth divice. If you notice abnormal performance, it may take
additional measures as a different orientation or position of instrument.
b) The field strength over a frequency range of 150 kHz to 80 MHz should be less than 3 V / m.
Recommended separation distances between portable radio equipment unity.
The scales RS model is expected to operate in an electromagnetic environment in which they control the noise
radiated RF. The customer or the operator may be of help to prevent electromagnetic interference by ensuring a
minimum distance between mobile communication devices and portable RF (transmitters) and unity, as
recommended below, with respect to the maximum power output of equipment radio.
RS RÈV.07 12/02/2019
3Vrms 150kHz to 80MHz (for
appliances that are not life
equipment)
the recommended
calculated by the frequency applied to the
transmitter. Recommended separation distance
d = 1.2 √ P d = 1.2 √ P from 80 MHz to 800 MHz d
= 2.3 √ P from 800 MHz to 2.5 GHz where the P
and maximum rated power output of the
transmitter in Watts (W) according to the
manufacturer of the transmitter and the
recommended separation distance in meters
(m). The intensity of the field of a fixed RF
transmitters, as determined
electromagnetic site, it could be lower than the
level of compliance of each range of frequency
b. You can check interference in proximity of
equipment marked with the following symbol:
separation distance
by an
24