Safety Instructions - Topcom POWERLAN NS-6701 Guide D'installation Rapide

1 Introduction
Powerlan NS-6701 plugs can be used to establish a network connection
between your modem, PC, set-top Box, games console, etc.
By default, the Powerlan NS-6701 plugs are not connected. To connect them,
follow the procedure given in Chapter 6.
Limitations
Ideally, the maximum electrical cable length between two Powerline devices
should be no more than 200 metres.
The connection quality will be impaired by:
– poor-quality electrical cabling.
– fuses.
– lightning/power surge protectors.
– multiphase voltage: some houses have three-phase electricity. The
quality of the Powerline connection will be dramatically impaired if the
devices are connected to different phases. In some cases, there will be
no communication at all.
– Some electrical equipment, such as microwave ovens, vacuum cleaners,
and old laptop/mobile phone chargers, will generate background noise on
the mains network during operation.

2 Safety instructions

For your own safety, make sure you read and follow all warning notices
and instructions.
– Do not open the device. Opening or removing the device cover can
expose you to dangerous high-voltage points or other risks. The device
can only be serviced by qualified service staff. Please contact your vendor
for further information.
– Do not use the device during a thunderstorm. There may be a risk of
electric shocks due to lightning.
– Do not expose the device to dust or corrosive liquids.
– Do not use this product near water sources.
– Make sure the cables are connected to the right port.
– Do not obstruct the vents on the device.
PowerLan NS-6701
5