Parts Of The Machine - Pitney Bowes SH59 Guide D'utilisation

Parts of the Machine

4
1
6
7
Item Part
1
ON/OFF/Stop button
2
Forward Button
3
Reverse Button
4 Control Panel Icons
5 Material Sensors
6 Paper Feed Slot
7 CD/DVD Feed Slot
8 CD/DVD Collection Tray
9 Paper Collection Bin
10 Bottle of Lubricating Oil
2
4
3
5
Description
• When pressed (if the machine is off), the
machine turns ON.
• When pressed and held for about three seconds (if the machine
is on), the machine tuns OFF. NOTE: The machine turns off
automatically if it is not used after five minutes.
• When pressed if the cutter mechanism is running, the machine
stops.
• When pressed briefly, the
mechanism runs forwards for a few seconds so remaining
material can be cleared from the machine.
• When pressed and held for about two seconds, the
up and the cutting mechanism runs forward continually so you
can feed material into the machine.
When pressed, the
in reverse for a short time.
Indicates status or condition of machine (see next page for details)
Detects when material is fed into any of the feed slots, prompting
the cutter mechanism to start shredding.
Allows you to feed paper for shredding
Allows you to feed CDs/DVDs/floppy disks for shredding
Collects and stores shredded CDs/DVDs/floppy disks
Collects and stores shredded paper
Used to lubricate the cutter mechanism when required
8
10 9
icon lights up and the cutting
icon lights up and the cutter mechanism runs
SH59 Shredder | 5
icon lights up and
icon lights
Operator Guide | SV62750 Rev. A