Quick Setup - Alesis GuitarLink Wireless Guide D'utilisation

User Guide (English)
1. Make sure all items listed in the Box Contents are
included.
2. READ SAFETY INSTRUCTION BOOKLET BEFORE
USING THE PRODUCT.
3. Place the product in an appropriate location for
operation.
Support
For complete system requirements, compatibility information, and product registration, visit the
Alesis website: alesis.com/guitarlink-wireless.
For additional product support, visit alesis.com/support.

Quick Setup

1. Flip the power switch to the "On" position for the transmitter and receiver.
2. Press the Pair Button on both the transmitter and the receiver. The Pair LED will be lit
solid on the transmitter and receiver when they have successfully connected.
3. Set the receiver antenna to a vertical position.
4. Connect your guitar to the transmitter and adjust your guitar's output volume.
5. Use a standard 1/4" cable (not included) to connect the receiver's Amp Output to your
amplifier.
6. Set the volume control on the receiver to the highest level possible without distorting or
clipping the guitar signal. This level will vary with the settings of your guitar's volume and
your guitar amplifier's gain and/or volume. Adjust your guitar amplifier's volume last.
BOX CONTENTS
GuitarLink Wireless
Transmitter
GuitarLink Wireless
Receiver
Power Adapter
2 AAA Batteries
User Guide
Safety & Warranty Manual
2