Emergency Battery Backup Strap - Sealy Reflexion Arc Manuel Du Propriétaire

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

emergency battery backup strap

Two (2) 9 Volt batteries are required to operate the power down feature and are NOT included.
STEP 1
Disconnect the Power Supply from the input power cord .
STEP 2
Connect the Battery Backup Strap to (2) Alkaline 9 Volt
batteries . Do not mix brand name Batteries .
12
STEP 3
Connect the end of the Battery Backup Strap to the input
power cord that is attached to the control box .
Battery Backup Strap
Note: Detach the Battery Backup Strap after the emergency
is over, as the system will continue to draw power from the
batteries even if not in use .
STEP 4
Use the remote control to lower the base .
For customer service call: 1-800-268-4414
Control Box
Input Cord

Publicité

Table des Matières
loading

Table des Matières