Yamaha SPM-K1 Manuel D'installation page 6

INSTALLATION PROCEDURE
Attach the small wall mount brackets to the Sound Projector.
Use four of the projector mounting screws (M6 x 16) provided to securely attach the small wall mount brackets (2) to the
rear left and right sides of the Sound Projector.
Projector mounting
screws (M6 x 16)
Mount the projector on the wall.
Fit the mounting guide hooks of the small wall mount brackets attached to the Sound Projector into the holes on the left
and right sides of the large wall mount bracket, then slide the unit to the right.
Hold the projector tight with the both hands when attaching / removing the projector to / from the wall.
Holding the projector loose could cause the projector to fall, resulting in personal injury.
E-4
Safety wire (Attached
by the method B)
1
Safety wire (Attached
by the method A)
Attach the brackets to the
rear left and right sides of
the Sound Projector.
1
2
2
Rear View
Fit the hook into the
hole.
Slide the unit to the
right.