Operation - Fairland PIONEER PH18L Notice D'installation Et Conseils D'utilisation

VII. Operation
Setting the time and
temperature set
point
Timer on indicator
lamp
Timer on
1. Display
A. The time is displayed while the pump is not running,
B. While the pump is running, the pool water temperature is displayed.
2 . Setting the pool water temperature set point
A. May be done while the pump is on or off.
B. Press the arrows  or  to set the temperature set point. The temperature displayed starts to blink, use the
arrows  or  to select the desired temperature
C. To view the temperature set point, press the  or arrows once, the set point value appears. The display returns
to normal after 5 seconds.
3 . Setting the time
A. May be done while the pump is on or off.
B. Press the key to set the time. The time displayed on the screen starts to blink, press the
Use the arrows  and  to select the desired hour. While the clock is still blinking, press the
set the minutes. use the arrows keys  or  to select the desired minutes. Once the time has been set, press
0
the key again, the water temperature is displayed.
The display returns to normal after 30 seconds.
0
4 . Timer: programming daily start and stop times
0
Once the time has been set correctly, this operation allows the user to select a daily start and stop time.
0
A. Press to set the start time. The LED lights up and the start time is displayed.
Press again and alter the Hours using the  and  keys. While the time is still blinking press
again to alter the minutes using the  and  keys. Once the start time has been set, press
water temperature will be displayed. The display returns to normal after 30 seconds.
MODE
0
Timer
Timer stopped
stopped
indicator lamp
27/32
Heat
Clock
2012/04 - Indice de révision : C - Code : 0033436
Heating
On/Off
key again.
key again to
0
0
0
0
, the