Remote Control (Optional) - AVer CAM130 Mode D'emploi

Remote Control (Optional)

*
SmartFrame (

and hold the button for 1~2 sec to switch from manually, auto framing and preset framing mode or
Off.
Enter ( ): Press it to show the current AI function on screen such as Auto Framing.

Load Preset Hotkey (

Number 0~9: Long press the number button to set preset point. One-click the number key to load

preset point.
FOV: Press

WDR: Press

Microphone: Press

Long press either

When fill light is off, press

When fill light is on, press

): One-click automatic FOV adjustment to fit all participants in screen. Press
): Press it to move to preset position as user has set in sequence.
then to change field of view between 90 degree and 120 degree.
then to enable/disable the WDR function.
then
or button for 1~2 sec to turn on/off the fill light function.
/
/
*
*
to enable/disable microphone function.
button to increase/decrease image brightness.
button to increase/decrease light level.
English-4
[Note] AAA batteries required
*Not supported for CAM130