Technical Data - Pkm EB-GK2-TC Mode D'emploi

C
OOKWARE DOES NOT BECOME HOT AND THE RELEVANT SYMBOL IS
 Cookware
cannot
because it is unsuitable, too small or
improperly
cooking zone.
T
HE APPLIANCE OR A COOKING ZONE HAS BEEN SWITCHED OFF
AUTOMATICALLY AND UNEXPECTEDLY
ERROR CODE IS DISPLAYED
 Technical malfunction.
If the appliance shows a malfunction not noted on the schedule above or if you
have checked all items on the above schedule but the problem still exists, please
contact the shop you purchased the appliance at.

7. Technical data

Model
Control panel
Material
Cooking zones
Power of cooking zones front / rear
Diameter of cooking zones front / rear
Maximum power
Voltage
Frequency
Residual heat indicator
Power levels
Power cable
Timer / adjustable time
Dim. installation opening B*T in cm
Installation depth in cm
Dim. installation H*B*T in cm
Weight net / gross in kg
depending on model
6
be detected,
positioned on
6 (
TYPICALLY ALTERNATING WITH ONE OR TWO
DIGITS ON THE TIMER
 Technical modifications reserved.
.
DISPLAYED
 Use suitable cookware which meets
the diameter of the cooking zone.
the Place cookware on the centre of the
cooking zone.
,
AN ACOUSTIC SIGNAL SOUNDS AND AN
-
DISPLAY
 Note
disconnect the appliance from the
mains and contact the shop you
purchased the appliance at
Glass ceramic Hob
1*1800 W / 1*1200 W
180 mm / 145 mm
9 per cooking zone
 / up to 99 minutes
67
).
the complete
Touch Control
Glass ceramic
2
3000 W
220 - 240 V AC
50 Hz

150 cm
26.80*50.00
4.40
5,30*28.80*52.00
4.50 / 5.30
error-code,