Additional Functions; Write Protection; Night Mode; Memory Card - Perel WLC002 Mode D'emploi

Version
Firmware information of the camera.

6.4 Additional Functions

Taking Photos, Recording Video and Playback
Slide the mode switch to the test position.
Taking photos: Press the capture button to switch to the capture mode. Press the shot
o
button to take a picture.
Recording video: Press the video button to switch to the video mode. Press the shot button
o
to start recording, press again to stop recording.
Playback: Press the playback button to switch to the playback mode. Press up or down to
o
select the picture or video. Press OK to start the playback, press again to pause, press the
menu button again to stop the playback. Press the playback button to exit the playback
mode.
Deleting Current/All File(s)
Options: Cancel → Delete
Slide Show
Captures can be played in a slideshow. Press OK to stop the slideshow.

Write Protection

Lock or unlock the file as desired.
Options: Write-protect Current File → Write-protect All Files → Unlock Current File → Unlock All Files

Night Mode

With insufficient ambient light, the IR LEDs will turn on automatically to provide necessary light.
However, reflective objects such as traffic signs can cause overexposure if they are located within
the recording range. Therefore, pictures taken in night mode may be blurry.
Also, make sure to provide the camera with adequate voltage when recording in night mode. Low
voltage may cause instable recording results.
6.5 Downloading Files onto a Computer

Memory Card

1. Insert the memory card into the card reader of your computer.
2. Open the File Explorer on your computer and double-click on the removable memory card.
3. Copy the files from the memory card to your computer.
V. 01 – 17/06/2020
WLC002
11 ©Velleman nv