Mounting And Operation; Maintenance And Inspection - HIKOKI UJ 1810DA Mode D'emploi

English

MOUNTING AND OPERATION

Action
Removing and inserting
the battery
Connection of a heated
outerwear and the USB
adapter
How to use hook of USB
adaptor
Switching between the
High (Fast heating mode)
heating stage and OFF
Set heating stages
Switching from the High,
Medium or Low heating
stage to OFF
Selecting accessories
*1) The previous BSL18UA model USB
adapter cannot be used. (The shape
of the DC12V output port is diff erent.)
*2) CAUTION
Set the low
continuous use.
It may result in heat stroke and/or burn.
CAUTION
• Ensure that the battery and power
plug are inserted fi rmly into the
USB adapter. If they are not fi rmly
inserted, there is a risk of unexpected
accidents.
NOTE
• When switching on, the High (fast
heating mode) stage is always set.
If no changes are eff ected to the
heating stages, the heating output is
automatically reduced to the medium
heating stage after approx. 5 minutes.
• If left in the rain or in a wet state over
an extended period of time, color
migration or bleeding to other fabrics
or materials may occur.
• Friction may cause color transfer to
other fabrics or materials. Please be
careful when wearing over or under
light-colored clothes.
Figure Page
2
3
4
5
6
*2
7
― 130
*1
heating stage
MAINTENANCE AND
INSPECTION
WARNING
2
When not in use or during inspection
and maintenance, be sure to remove
the USB adapter and battery from the
3
heated outerwear.
● How to Clean
CAUTION
3
• Prior to cleaning, remove the battery
from the USB adapter, and remove
3
all connections between the heated
outerwear and the USB adapter,
smartphones, etc.
4
• Do not wash the heated outerwear
together with other items, as its colors
4
will bleed due to the nature of the
dyes.
1. Prior to cleaning remove all contents
of the pockets, in particular the USB
adapter, battery and USB devices.
2. Store the power cord in the back
pocket. Empty all of the other pockets,
and close the zippers of all pockets.
for
3. The connection plug can be washed
together with the heated outerwear.
4. Do not clean with aggressive cleaning
agents.
5. Prior to connection with the USB
adapter, the heated outerwear and
the contacts have to be dry.
6. Refer to the instructions on the inside
of the heated outerwear for washing:
● Storage
Do not store the heated outerwear and
USB adapter in the following places.
○ Within reach of children
○ In humid or dusty places
○ In high temperature such as inside
a car or exposed to direct sunlight
○ In extremely cold places or
directly exposed to cold draughts
○ Where the temperature changes
drastically
12