Publicité
Les langues disponibles
Les langues disponibles
The power supply module PS used is the one as used in the former PSDRV and its output power
is limited to 3.1 A by 24 VCC.
With this power supply you can't get the peak performances of the DRV2. To achieve those peak
performances we suggest to use an outsourced power supply 24 or 48 VCC, maximum current
12 A is both channel are used simultaneously.
DIMENSIONS
Depth 185 mm
Subject to alteration without prior notice
MC701r-ml-0625
CROSS-REFERENCES TO THE TERMINAL OF THE DRV
DRV
Ref 10V
0V
InBxV
InB 0-10V
0V
InAxV
InA 0-10V
0V
BRK COM
BRK B+
BRK COM
BRK A+
+ 24 V
0V
Caution : On the DRV2, in the opposite to the former
DRV, the terminals 4, 2 and 9 are not connected
together inside of the drive.
USER MANUAL
MCS2000-DRV2 & PSDRV2
DRV2
Doesn't exist
Doesn't exist
Doesn't exist
Terminal 3
Terminal 4
Doesn't exist
Terminal 1
Terminal 2
Terminal 8
Terminal 7
Terminal 6
Terminal 5
Terminal 10
Terminal 9
WARNER ELECTRIC EUROPE
BP 20095, F-49182
St Barthélemy d'Anjou Cedex
Tel.
+33 (0)2 41 21 24 24
Fax
+33 (0)2 41 21 24 00
www.warnerelectric-eu.com
Page 5 of 16
Publicité
