Charger And Hand Control; Maintenance/Safety Check - Aquatec R Mode D'emploi

7.2

Charger and hand control

CAUTION!
There is a risk of injury from electric shock.
●
Before cleaning the charger, always pull
the plug out of the power socket.
● Never plug objects made of conducting
material (e.g. knitting needles, metal
pins) into the jack socket of the hand
control.
● Only use a dry cloth to clean the
charger.
1. Wipe down the charger with a dry cloth.
2. Wipe down the hand control with a damp cloth
and dry it with a dry cloth.
3. If the bathlift will not be used for prolonged
periods, fully charge the battery (charge time of
about 4 hours) and then raise and lower the
bathlift 3 times while it is unloaded. Repeat this
procedure every 12 months. This preserves the
service life of the battery.
7.3

Maintenance/safety check

Important!
The hand control may only be opened by the
manufacturer of the lifter.
When used properly, the bathlift is maintenance-free.
Before you use it, check for any visible damage. If you
detect damage, contact an authorised workshop.
To maintain the functional reliability of your bathlift, it
should be inspected by an authorised workshop each
time it is reinstalled or after 24 months.
Only authorised dealers are permitted to perform re-
quired repairs.
EN
9