Disposal; Troubleshooting - Beurer EM 28 Mode D'emploi

Warning
• If the cuff is damaged, it must be replaced.
• Before putting the cuff on again, first clean the body parts
to be treated.
Storage
• Switch off the control unit and disconnect the connec-
tion cable.
• Remove the cuff.
• Disconnect the connection cable from the cuff.
• Put the control unit, the cuff and the connection cable in
their original packaging.
• Store the original packaging in a cool, dry place that is
inaccessible to children.
• Remove the batteries from the device if you will not be
using it for a prolonged period of time. Leaking batteries
may damage the device.

8. Disposal

For environmental reasons, do not dispose of the
device in the household waste at the end of its ser-
vice life.
Dispose of the device at a suitable local collection or
recycling point in your country. Dispose of the device in
accordance with EC Directive – WEEE (Waste Electrical and
Electronic Equipment).
If you have any questions, please contact the local author-
ities responsible for waste disposal.
The empty, completely flat batteries must be disposed of
through specially designated collection boxes, recycling
points or electronics retailers. You are legally required to
dispose of the batteries.
The codes below are printed on batteries containing harmful
substances:
Pb = Battery contains lead
Cd = Battery contains cadmium
Hg = Battery contains mercury

9. Troubleshooting

Problem Possible cause
The batteries are
The device
empty.
does not
The batteries are not
switch on.
inserted correctly.
Cuff is not in suffi-
cient contact with
the skin.
Stimulation
is too weak.
Water contact elec-
trodes are not suffi-
ciently moist.
28
Solution
Replace the
batteries.
Reinsert the
batteries.
Reposition the
cuff. Ensure there
is sufficient con-
tact with the skin.
Switch off the
device. Moisten
electrodes.