Makita DMP180 Manuel D'instruction page 8

OPERATION
NOTE: The standard adapters vary depending on the
country.
Unfold the air chuck clamp.
Attach the air chuck to the valve stem.
Air chuck clamp Valve stem
Turn on the tool, and then set the pressure value
appropriate for the tire using the pressure gauge.
Keep pulling the switch trigger until the tool stops.
Loosen the locking nut on the valve stem.
1
Locking nut
Unfold the air chuck clamp.
Attach the Presta valve adapter to the valve
stem, and then attach the air chuck to the Presta valve
adapter.
1
1
2
3
clamp
Turn on the tool, and then set the pressure value
Air chuck
appropriate for the tire using the pressure gauge.
Keep pulling the switch trigger until the tool stops.
Remove the air chuck and Presta valve adapter,
and then tighten the locking nut.
Unfold the air chuck clamp.
Attach the sport ball needle or tapered adapter to
the air chuck.
Insert the sport ball needle or tapered adapter into
the hole on the item.
8 ENGLISH
2
4
Presta valve adapter Air chuck
Valve stem
1 2
Air chuck clamp Air chuck
Tapered adapter
3
Air chuck
-
-
3
4
Sport ball needle