Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12
• This appliance is not intended to be immersed in water during
cleaning. Please observe the instructions that we have included for
you in the chapter "Cleaning".

Scope of Delivery

1 Main body
1 Round brush with coarse bristles (Ø approx. 25 mm)
1 Round brush with smooth bristles (Ø approx. 35 mm)
Assembly / Disassembly of Attachments
WARNING: Risk of burns!
If you want to change an attachment directly after use, let
the appliance cool down first!
Refer to the markings on the main unit and the attachments.
1. Select a desired attachment. Insert the attachment so
that the arrow on the base unit
attachment
are aligned precisely above each other. The
attachment must audibly engage.
2. To loosen the attachment, hold down the button on the
appliance and pull the attachment upwards.
Commissioning
• Remove all packaging material.
• Unwind the mains cable completely.
• Fit one attachment.
Electrical Connection
• Before inserting the plug into the socket, make sure that
the mains voltage to be used matches that of the appli-
ance. You can find this information on the nameplate.
• Connect the appliance to a properly installed earthed
socket.
26
PC-HAS3011_IM
Switch Positions
The appliance has a switch with 4 settings. The labeling and
selected setting can be found above the slide switch. You can
select the following functions:
Using the Round Brushes
The round brushes feature different diameters. Select a brush
according to the desired size of curls.
and the arrow on the
• Comb your hair and separate it into single strands.
• Twist one hair strand around the brush starting from the
• Then unwind the hair strand again.
• Blow-dry your hair strand by strand.
After Use
• Let your hair cool down completely before continuing to
• Do not comb your hair afterwards if you want to keep the
Switch-Off
After use, slide the switch to position "0" and disconnect from
the mains.
Storage
• Leave the appliance to cool before putting it away!
• To do so, place the appliance onto one side of the hous-
Mains Cable
• The mains cable should only be wound up loosely.
• Never tie the cable tightly round the appliance, as over
• Check the mains cable regularly for damages.
Use
0 = Off
C = Cold setting for style fix
I = Medium temperature
II = High temperature
tips all the way to the hairline. Keep holding the appliance
in that position for several seconds until the desired
degree of drying and styling has been achieved.
style it.
curls strong. Just use your fingers for styling.
ing or hang it up by the suspension eye.
time this may result in the cable breaking.
21.09.17

Publicité

Table des Matières
loading

Table des Matières