THOMSON CL201 Mode D'emploi page 23

If your unit displays the wrong time or does not function properly, which may be caused by electrostatic
discharge or other interference, use a thin object to press the RESET button at the back of the unit. All
the settings will be reset to default and you need to complete the set up procedure for your unit again.
1. Place the unit on a stable surface, away from direct sunlight or excessive heat or moisture.
2. Protect natural wood or lacquered surfaces by placing the unit on a cloth or protective material.
3. Clean the unit with a soft cloth moistened only with mild soap and water. Stronger agents such as
benzine, solvents or similar materials can damage the surface of the unit. Make sure to unplug the
unit before cleaning.
4. Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable
(nickel-cadmium) batteries.
5. If the unit is not going to be used for a prolonged period, such as one month or longer, remove the
batteries to prevent possible corrosion. Should the battery compartment become corroded or dirty,
clean the compartment thoroughly and replace the batteries.
6. Do not open the inner back case or tamper with any components of this unit.
7. Do not plug in any other AC/DC adaptor which does not have the correct specifications or use the
correct voltage.
SPECIFICATIONS
Power Supply
AC230V – 50Hz
Power consumption: 5W
Radio frequency coverage
FM: 87.5 – 108MHz
Don't discard the electrical and electronic appliances in the regular waste disposal.
Take them to a collection point.
Some components in these appliances may be hazardous to health and the
environment.
TROUBLESHOOTING
PRODUCT CARE & MAINTENANCE