Volume Control
Input Selection
The KICKER KPw will always default to Bluetooth input. If a connected Bluetooth source
is playing audio while you are attempting to use the 3.5mm auxiliary
input, the Bluetooth source will override the analog source. To use the Aux input, con-
nect a 3.5mm stereo cable and stop playback from the connected Bluetooth device.
Speakerphone
The KPw will allow you to answer incoming
phone calls and communicate with the built-in
microphone, located on the front of the KPw
between the speakers. A system tone will
play when there is an incoming call. Press the
Bluetooth|Phone button when receiving
a phone call to answer. Audio playback will
resume when the call is completed.
4
Use the volume slider to increase or decrease the volume level. When using the
auxiliary input, set the output level of your audio device as high as possible without
distorting, then adjust the volume slider of the KPw.
volume slider
1/8" [3.5mm] Aux Input
BATTERY STATUS LED (RED)
Normal Battery
Low Battery
Charging
Finished Charging
battery status LED
Off
2 intermittent blinks
Breathing
Solid