Setting Up Instructions - air&me FD65 Manuel D'installation

SETTING UP INSTRUCTIONS

IMPORTANT
Place dehumidifier in the upright position. When transporting a dehumidifier to
site, allow the dehumidifier to stand for 30 minutes before switching ON. This is
necessary to allow the refrigerant system to stabilise and avoid system damage .
SETTING UP THE DEHUMIDIFIER: Operate the dehumidifier in an enclosed area,
as this creates a drying chamber. Close all doors, windows or areas that open to
external areas, to maximize the dehumidifier's water removal efficiency.
traffic through the drying chamber to a minimum.
centre of the room away from walls and furnishings. DO NOT allow the airflows to
be obstructed.
Ill ustration de positionnement correct e pour la meilleure performance
DRAINAGE: The dehumidifier pump connects to a plastic drainage hose. The hose
is stored on the back of the appliance. Uncoil the entire hose ensuring there are no
kinks or restrictions and place the unattached end into a water vessel or run to
outdoors.
Ensure that water which runs to outdoors does NOT create a slip hazard.
Water vessels MUST be checked regu larly where used.
Place the dehumidifier in the
21
Keep